My Account       Cart Contents      Checkout
    
    1-800-810 4521    
Quick Find  
Shopping Cart: 0 items
Categories

Automotive/RV

Boat Outfitting

Camping

Cartography - C-Map

Cartography - Garmin

Cartography - Misc.

Cartography - Navionics

Communication

Electrical

Electronics

   Accessories

   AIS Systems

   Autopilots

   Black Box Modules

   Cameras

   Cameras - Network Video

   Chart Plotters

   Combo Chart Plotters

   Fishfinder/Sounder - Color

   Fishfinder/Sounder - Mono

   GPS - Chartplotters

   GPS - Fishfinder Combos

   GPS - Trak Plotter

   Monitors

   Network Accessories

   Network Capable Displays

   Radar - Stand Alone

   Radar Domes / Arrays

   Radars

   Software

   Sonars

   Transducer Accessories

   Transducers

   Underwater Cameras

   Weather Fax

Entertainment

Home/Office

Marine Instruments

Marine Plumbing & Ventilation

Marine Safety

Outdoor

Paddlesports

Watersports

Winterizing
Manufacturers

What's New?

Airmar B122 —Long Stem, Smart™ Sensor NMEA 2000®
Airmar B122 —Long Stem, Smart™ Sensor NMEA 2000®
$449.99


Buy Now
Airmar P79 NMEA 2000 Depth Transducer P79-235-N2 Airmar P79 NMEA
Manufactrer#Airmar P79 NMEA
$227.99
Availbilty In Stock
Usually leaves our warehouse in 2 business day!
Shipping
Airmar P79 NMEA 2000 Depth Transducer P79-235-N2
Airmar P79 NMEA 2000 Depth Transducer P79-235-N2Airmar P79 NMEA
The P79 is a 50/200kHz fishfinder transducer that mounts inside a hull - no hole is needed in the hull. The active element mounts in a small round tank (included) which is epoxied to the hull and filled with antifreeze. This transducer is for use with solid fiberglass hulls only. Cored hulls will impede the signal. This unit cannot measure water temperature.

This item consists of the P79 transducer with a fixed 6M NMEA 2000 drop cable ending in a standard NMEA 2000 male connector.

Although most P79s are now made as a generic 'mix and match' (MM) transducer with a brand-specific adapter cable, this unit has a different internal circuitry and a permanent fixed 6M cable and cannot be used with MM adapters.

    Product Features
  • In-hull unit with plastic housing
  • NMEA 2000 interface with attached 6 M drop cable and standard NMEA 2000 male connector
  • Data update rate 1/second
  • Power consumption 40mA (1 LEN)
  • 235kHz output will not interfere with fishfinders
  • 7 degree beam width
  • Minimum depth 0.4M (1.3 Ft)
  • Maximum depth 180M (594 Ft)
  • For digital readouts only, not for use with graphing fishfinders
  • Adjusts to hull deadrise angles of 2 deg to 22 deg
  • Tank should be epoxied to hull
  • Tank should be filled with non-toxic antifreeze (propylene glycol). Do not use mineral oil.
  • Transducer screws into top of tank as shown
  • Can be used in aluminum hulls under 0.38mm thick (0.150")
  • Can be used in RIBs
  • Can be used in sailboats with solid glass hulls
    • This transducer has an NMEA 2000 interface. It can be connected to any NMEA 2000 network, and all displays on the network will then be able to access the data transmitted by the transducer. Power for the transducer logic circuits is provided by the NMEA 2000 network.

Reviews
Shipping      Returns    Privacy Notice      Conditions of Use      Log In      My Account     Contact Us